THE IPHONE SCIENTIFIC CALCULATOR
The iPhone Scientific Calculator is a widelyused calculator App (click here to see our fully functional
online version), which was first lauched by Apple in 2007 as part of their operating system for iPhones and other smart devices and
has been developed continuously ever since.
The App is basically 2 calculators in 1: a simple 4function calculator that can be used for addition, subtraction, multiplication, and
division, and a fully functional scientific calculator that can be used for trigonometric calculations, logarithms, square roots, and
percentages.
Using the Calculator
This calculator can be used like a normal calculator.
When you click the main function buttons, the button is highlighted to show the operation to be performed. The highlight on the
opened round bracket will stay on until all parenthesis expressions are completed.
This calculator uses an algebraic method of entry that allows you to enter mathematical sequences in the same order that they are
algebraically stated.
You can switch between the 4 digit grouping modes (1 234.5), (1 234,5), (1,234.5) or (1.234,5) by clicking the circle on the left
of the display (showing . , ,. or
.,) or by typing hShiftG
Keyboard support
There is full keyboard support for each button on the calculator.
 The numbers and + – × ÷ , . = keys can also be input using the number pad.
 The keyboard shortcuts for each calculator button can be seen below.
 Use the Backspace key to correct the last, single input number, point or +/ sign.
 All ENTER keys represent the '=' button.
 Hold key: hs means: type h or H and you'll see a 'hold' symbol in the bottom right corner of the display.
This changes the next key function: s = sin, but hs = sinh, etc.
 Copy/Paste from/to display with CtrlC and CtrlV.
 Click on the > or < sign on the top left of the display,
doubleclick the display or use the TAB key to toggle between scientific and simple modes.
 The keyboard shortcuts shown below are available in both scientific and simple modes.
Standard Function Keys
 Type Delete to clear the displayed number.
Removes an incorrect entry/number from the display when pressed before any function or operation key is pressed.
 Type Delete to clear the displayed number
and the constant and pending operations.
 Type v to clear the memory.
 Type b to add the displayed number to the number in memory.
If no number is in memory, click to store the displayed number in memory.
 Type n to subtract the displayed number from the number in
memory. If no number is in memory, click to store the displayed number as a subtraction of zero in memory.
 Type m to replace the displayed number with the number
in memory. If the button is highlighted, there is a number stored in memory. The highlight around the button also disappears if the
stored number calculates zero.
 Type # to change the algebraic sign
 Click
ENTER to complete any function or operation and display the result. If there are any unfinished parenthesis expressions
before this key is pressed, they will be completed automatically. For example, 2*(2+3*(2+4))=40 is the same as typing
2*(2+3*(2+4=40
The stored number, the display, all constant and pending operations and the key states remain in memory when you switch between the
standard and scientific calculators and even if you turn the calculator "off" by losing focus from the app or pressing the
Esc key.
Scientific Function Keys
Click on the > or < sign in the left side of the display, doubleclick
the display or press the TAB key to toggle between scientific and simple modes.
 Type Space to change the trigonometric buttons
(sin, cos, tan, sinh, cosh, and tanh)
to their inverse functions (sin^{1}, cos^{1}, tan^{1}, sinh^{1}, cosh^{1}, and
tanh^{1}). It also changes ln to log_{2},
and e^{x} to 2^{x}. Click 2nd again to return the buttons to their original functions.
 Type ( to open a parenthetical expression. Expressions can be
nested. Clicking on it lets a white ring appear around the button to let you know that a parenthetical expresion is still active
(until all expressions are closed with the closeing bracket or the equation sign).
 Type ) to close a parenthetical expression. The highlight around
the ( bracket key will stay until all expressions are closed with this key or after clicking the equation sign.
 Type % to calculate percentages, add markups, and subtract
discounts. To calculate a percentage, use it with the +, –, × or ÷ keys. For example, to calculate 8% of 500, enter 500 x 8 %
(no equation key (=)) which returns 40. To add a markup or subtract a discount, additionaly use the equation (=) key. For example,
to compute the total cost of a item with an 8% sales tax, enter 500 + 8 % = which returns 540.
 Type h1 to return the reciprocal of a value in
decimal format.
 Type h2 to square a value.
 Type h3 to ube a value.
 Type ^ or ' or " between
values to raise the first value to the power of the second value. For example, to compute 3^{4}, enter 3 y^{x}
4 = which returns 81.
 Type x to calculate the factorial of a value (only integers).
 Type hr to calculate the square root of a value.
 Type r between
values to calculate the x root of y. For example to compute ^{4}√81, enter 81 ^{x}√y 4 = which returns 3.
 Type ShiftL to return the log base 10 of a value.
 Type s Calculates the sine of a value.
 Type ShiftS to calculate the arc sine
of a value. (Available when the 2nd button is clicked.)
 Type c Calculates the cosine of a value.
 Type ShiftC Calculates the arc cosine
of a value. (Available when the 2nd button is clicked.)
 Type t Calculates the tangent of a value.
 Type ShiftT to calculate the arc
tangent of a value. (Available when the 2nd button is clicked.)
 Type l Calculates the natural log of a value.
 Type hl to calculate the log base 2.
(Available when the 2nd button is clicked.)
 Type hs to calculate the hyperbolic sine of a
value.
 Type hShiftS to
calculate the inverse hyperbolic sine of a value. (Available when the 2nd button is clicked.)
 Type hc to calculate the hyperbolic cosine of a
value.
 Type hShiftC to calculate
the inverse hyperbolic cosine of a value. (Available when the 2nd button is clicked.)
 Type ht to calculate the hyperbolic tangent of a
value.
 Type hShiftT to calculate
the inverse hyperbolic tangent of a value. (Available when the 2nd button is clicked.)
 Type e after entering a value to raise the constant
'e' (2.718281828459045…) to the power of that value.
 Type ShiftX or he
to calculate 2 to the power of the displayed value. For example, 10 2^{x} = 1024. (Available when the 2nd button is clicked.)
 Type d to change the mode to express trigonometric functions
in radians.
 Type d to change the mode to express trigonometric functions
in degrees.
 Type p to enter the value of PI or π (3.141592653589793…).
 ClickShiftE to multiply the currently displayed
value by 10 to the power of the next value you enter.
 Type hn or hd to return a
random number between 0 and 1.

